有 278 筆資料符合您搜尋的條件
- 2016年 6月 26日, 17:05
- 版面: KUKA
- 主題: 機械手臂安全檢查表/ Robotic Safety Check List
- 回覆: 3
- 觀看: 11885
- 2016年 5月 18日, 16:17
- 版面: YASKAWA
- 主題: Power Source for Motoman MH3F
- 回覆: 1
- 觀看: 5699
Re: Power Source for Motoman MH3F
After checking the plate on the FS100 controller, I found that power supply can have two choices: 3-Phase AC200/220V or 1-Phase AC200/230V. So I use 1-Phase AC200/230V as the power supply and the robot runs normally.
- 2016年 5月 7日, 17:12
- 版面: YASKAWA
- 主題: Power Source for Motoman MH3F
- 回覆: 1
- 觀看: 5699
Power Source for Motoman MH3F
I just get the Motoman MH3F imported from Japan and its controller is FS100. The problem now I have is that "Can I use 220V AC single phase instead of three phase as the power source for it?"
- 2016年 5月 7日, 17:08
- 版面: KUKA
- 主題: KR10 TOOL無法校準
- 回覆: 2
- 觀看: 6891
Re: KR10 TOOL無法校準
1. Un-Mastering and Mastering the robot carefully.
2. Re-calibrate the tool.
Please refer to the following website as well: Wise-Tech Technical Support
2. Re-calibrate the tool.
Please refer to the following website as well: Wise-Tech Technical Support
- 2016年 4月 6日, 10:41
- 版面: KUKA
- 主題: KRC1 Software Limit Switch +A3
- 回覆: 8
- 觀看: 13188
Re: KRC1 Software Limit Switch +A3
BRAVO!!!
- 2016年 3月 24日, 13:48
- 版面: KUKA
- 主題: KRC1 Software Limit Switch +A3
- 回覆: 8
- 觀看: 13188
Re: KRC1 Software Limit Switch +A3
Check the hardware connections.
- 2016年 3月 24日, 13:07
- 版面: KUKA
- 主題: KRC1 Software Limit Switch +A3
- 回覆: 8
- 觀看: 13188
Re: KRC1 Software Limit Switch +A3
可能是A3的位置跑掉!
Try to Unmastering A3 and then Mastering A3
Try to Unmastering A3 and then Mastering A3
- 2016年 2月 4日, 16:46
- 版面: 活動公告
- 主題: 「KUKA操作基礎工作營」
- 回覆: 0
- 觀看: 7166