有 280 筆資料符合您搜尋的條件
- 2016年 7月 7日, 09:55
- 版面: KUKA
- 主題: Possible reasons for the error of invalid configuration in SafeRDW for KR 60HA Safe Robot
- 回覆: 0
- 觀看: 5298
Possible reasons for the error of invalid configuration in SafeRDW for KR 60HA Safe Robot
Possible reasons for the error of Invalid configuration in SafeRDW for KR 60HA Safe Robot with one external axis using KR 2ed05 controller 1. $G_COE_CUR[7]=85: Current Regulator may be set too high, A1 to A6 are all set to 15 2. Permissible rated current: $CURR_MON[7]=12.80 may not be enough. 3. Lim...
- 2016年 6月 26日, 17:05
- 版面: KUKA
- 主題: 機械手臂安全檢查表/ Robotic Safety Check List
- 回覆: 3
- 觀看: 12254
- 2016年 5月 18日, 16:17
- 版面: YASKAWA
- 主題: Power Source for Motoman MH3F
- 回覆: 1
- 觀看: 6039
Re: Power Source for Motoman MH3F
After checking the plate on the FS100 controller, I found that power supply can have two choices: 3-Phase AC200/220V or 1-Phase AC200/230V. So I use 1-Phase AC200/230V as the power supply and the robot runs normally.
- 2016年 5月 7日, 17:12
- 版面: YASKAWA
- 主題: Power Source for Motoman MH3F
- 回覆: 1
- 觀看: 6039
Power Source for Motoman MH3F
I just get the Motoman MH3F imported from Japan and its controller is FS100. The problem now I have is that "Can I use 220V AC single phase instead of three phase as the power source for it?"
- 2016年 5月 7日, 17:08
- 版面: KUKA
- 主題: KR10 TOOL無法校準
- 回覆: 2
- 觀看: 6918
Re: KR10 TOOL無法校準
1. Un-Mastering and Mastering the robot carefully.
2. Re-calibrate the tool.
Please refer to the following website as well: Wise-Tech Technical Support
2. Re-calibrate the tool.
Please refer to the following website as well: Wise-Tech Technical Support
- 2016年 4月 6日, 10:41
- 版面: KUKA
- 主題: KRC1 Software Limit Switch +A3
- 回覆: 8
- 觀看: 13266
Re: KRC1 Software Limit Switch +A3
BRAVO!!!
- 2016年 3月 24日, 13:48
- 版面: KUKA
- 主題: KRC1 Software Limit Switch +A3
- 回覆: 8
- 觀看: 13266
Re: KRC1 Software Limit Switch +A3
Check the hardware connections.
- 2016年 3月 24日, 13:07
- 版面: KUKA
- 主題: KRC1 Software Limit Switch +A3
- 回覆: 8
- 觀看: 13266
Re: KRC1 Software Limit Switch +A3
可能是A3的位置跑掉!
Try to Unmastering A3 and then Mastering A3
Try to Unmastering A3 and then Mastering A3
- 2016年 2月 4日, 16:46
- 版面: 活動公告
- 主題: 「KUKA操作基礎工作營」
- 回覆: 0
- 觀看: 7480